 STM32F0xx_StdPeriph_Driver | |
  ADC | ADC driver modules |
 ADC_Exported_Constants | |
 ADC_JitterOff | |
| ADC_Resolution | |
| ADC_external_trigger_edge_conversion | |
| ADC_external_trigger_sources_for_channels_conversion | |
| ADC_data_align | |
| ADC_Scan_Direction | |
| ADC_DMA_Mode | |
| ADC_analog_watchdog_selection | |
| ADC_sampling_times | |
| ADC_thresholds | |
| ADC_channels | |
| ADC_interrupts_definition | |
 ADC_flags_definition | |
 ADC_Private_Functions | |
| Initialization and Configuration functions | Initialization and Configuration functions |
| Power saving functions | Power saving functions |
| Analog Watchdog configuration functions | Analog Watchdog configuration functions |
| Temperature Sensor, Vrefint and Vbat management functions | Temperature Sensor, Vrefint and Vbat management functions |
| Channels Configuration functions | Channels Configuration functions |
| DMA Configuration functions | Regular Channels DMA Configuration functions |
| Interrupts and flags management functions | Interrupts and flags management functions |
| CEC | CEC driver modules |
| CEC_Exported_Constants | |
| CEC_Signal_Free_Time | |
| CEC_RxTolerance | |
| CEC_Stop_Reception | |
| CEC_Bit_Rising_Error_Generation | |
| CEC_Long_Bit_Error_Generation | |
| CEC_BDR_No_Gen | |
| CEC_SFT_Option | |
| CEC_Own_Address | |
| CEC_Interrupt_Configuration_definition | |
| CEC_ISR_register_flags_definition | |
| CEC_Private_Functions | |
| Initialization and Configuration functions | Initialization and Configuration functions |
| Data transfers functions | Data transfers functions |
| Interrupts and flags management functions | Interrupts and flags management functions |
| COMP | COMP driver modules |
| COMP_Exported_Constants | |
| COMP_Selection | |
| COMP_InvertingInput | |
| COMP_Output | |
| COMP_OutputPolarity | |
| COMP_Hysteresis | |
| COMP_Mode | |
| COMP_OutputLevel | |
| COMP_Private_Functions | |
| Initialization and Configuration functions | Initialization and Configuration functions |
| Window mode control function | Window mode control function |
| COMP configuration locking function | COMP1 and COMP2 configuration locking function COMP1 and COMP2 configuration can be locked each separately. Unlocking is performed by system reset |
| CRC | CRC driver modules |
| CRC_Exported_Constants | |
| CRC_Private_Functions | |
| Configuration of the CRC computation unit functions | Configuration of the CRC computation unit functions |
| CRC computation of one/many 32-bit data functions | CRC computation of one/many 32-bit data functions |
| CRC Independent Register (IDR) access functions | CRC Independent Register (IDR) access (write/read) functions |
| DAC | DAC driver modules |
| DAC_Exported_Constants | |
| DAC_Trigger | |
| DAC_OutputBuffer | |
| DAC_Channel_selection | |
| DAC_data_alignment | |
| DAC_data | |
| DAC_interrupts_definition | |
| DAC_flags_definition | |
| DAC_Private_Functions | |
| DAC channels configuration | DAC channels configuration: trigger, output buffer, data format |
| DMA management functions | DMA management functions |
| Interrupts and flags management functions | Interrupts and flags management functions |
| DBGMCU | DBGMCU driver modules |
| DBGMCU_Exported_Constants | |
| DBGMCU_Private_Functions | |
| Device and Revision ID management functions | Device and Revision ID management functions |
| Peripherals Configuration functions | Peripherals Configuration |
| DMA | DMA driver modules |
| DMA_Exported_Constants | |
| DMA_data_transfer_direction | |
| DMA_peripheral_incremented_mode | |
| DMA_memory_incremented_mode | |
| DMA_peripheral_data_size | |
| DMA_memory_data_size | |
| DMA_circular_normal_mode | |
| DMA_priority_level | |
| DMA_memory_to_memory | |
| DMA_interrupts_definition | |
| DMA_flags_definition | |
| DMA_Buffer_Size | |
| DMA_Private_Functions | |
| Initialization and Configuration functions | Initialization and Configuration functions |
| Data Counter functions | Data Counter functions |
| Interrupts and flags management functions | Interrupts and flags management functions |
| EXTI | EXTI driver modules |
| EXTI_Exported_Constants | |
| EXTI_Lines | |
| EXTI_Private_Functions | |
| Initialization and Configuration functions | Initialization and Configuration functions |
| Interrupts and flags management functions | Interrupts and flags management functions |
| FLASH | FLASH driver modules |
| FLASH_Exported_Constants | |
| FLASH_Latency | |
| FLASH_Interrupts | |
| FLASH_Address | |
| FLASH_OB_DATA_ADDRESS | |
| FLASH_Option_Bytes_Write_Protection | |
| FLASH_Option_Bytes_Read_Protection | |
| FLASH_Option_Bytes_IWatchdog | |
| FLASH_Option_Bytes_nRST_STOP | |
| FLASH_Option_Bytes_nRST_STDBY | |
| FLASH_Option_Bytes_BOOT1 | |
| FLASH_Option_Bytes_VDDA_Analog_Monitoring | |
| FLASH_Option_Bytes_SRAM_Parity_Enable | |
| FLASH_Flags | |
| FLASH_Timeout_definition | |
| FLASH_Private_Functions | |
| FLASH Interface configuration functions | FLASH Interface configuration functions |
| FLASH Memory Programming functions | FLASH Memory Programming functions |
| Option Bytes Programming functions | Option Bytes Programming functions |
| Interrupts and flags management functions | Interrupts and flags management functions |
| GPIO | GPIO driver modules |
| Configuration_Mode_enumeration | |
| Output_type_enumeration | |
| Output_Maximum_frequency_enumeration | |
| Configuration_Pull-Up_Pull-Down_enumeration | |
| Bit_SET_and_Bit_RESET_enumeration | |
| GPIO_Exported_Constants | |
| GPIO_pins_define | |
| GPIO_Pin_sources | |
| GPIO_Alternate_function_selection_define | |
| GPIO_Speed_Legacy | |
| GPIO_Private_Functions | |
| Initialization and Configuration | Initialization and Configuration |
| GPIO Read and Write | GPIO Read and Write |
| GPIO Alternate functions configuration functions | GPIO Alternate functions configuration functions |
| I2C | I2C driver modules |
| I2C_Exported_Constants | |
| I2C_Analog_Filter | |
| I2C_Digital_Filter | |
| I2C_mode | |
| I2C_acknowledgement | |
| I2C_acknowledged_address | |
| I2C_own_address1 | |
| I2C_transfer_direction | |
| I2C_DMA_transfer_requests | |
| I2C_slave_address | |
| I2C_own_address2 | |
| I2C_own_address2_mask | |
| I2C_timeout | |
| I2C_registers | |
| I2C_interrupts_definition | |
| I2C_flags_definition | |
| I2C_ReloadEndMode_definition | |
| I2C_StartStopMode_definition | |
| I2C_Private_Functions | |
| Initialization and Configuration functions | Initialization and Configuration functions |
| Communications handling functions | Communications handling functions |
| SMBUS management functions | SMBUS management functions |
| I2C registers management functions | I2C registers management functions |
| Data transfers management functions | Data transfers management functions |
| DMA transfers management functions | DMA transfers management functions |
| Interrupts and flags management functions | Interrupts and flags management functions |
| IWDG | IWDG driver modules |
| IWDG_Exported_Constants | |
| IWDG_WriteAccess | |
| IWDG_prescaler | |
| IWDG_Flag | |
| IWDG_Private_Functions | |
| Prescaler and Counter configuration functions | Prescaler and Counter configuration functions |
| IWDG activation function | IWDG activation function |
| Flag management function | Flag management function |
| MISC | MISC driver modules |
| MISC_Exported_Constants | |
| MISC_System_Low_Power | |
| MISC_Preemption_Priority_Group | |
| MISC_SysTick_clock_source | |
| MISC_Private_Functions | |
| PWR | PWR driver modules |
| PWR_Exported_Constants | |
| PWR_PVD_detection_level | |
| PWR_WakeUp_Pins | |
| PWR_Regulator_state_is_Sleep_STOP_mode | |
| PWR_SLEEP_mode_entry | |
| PWR_STOP_mode_entry | |
| PWR_Flag | |
| PWR_Private_Functions | |
| Backup Domain Access function | Backup Domain Access function |
| PVD configuration functions | PVD configuration functions |
| WakeUp pins configuration functions | WakeUp pins configuration functions |
| Low Power modes configuration functions | Low Power modes configuration functions |
| Flags management functions | Flags management functions |
| RCC | RCC driver modules |
| RCC_Exported_Constants | |
| RCC_HSE_configuration | |
| RCC_PLL_Clock_Source | |
| RCC_PLL_Multiplication_Factor | |
| RCC_PREDIV1_division_factor | |
| RCC_System_Clock_Source | |
| RCC_AHB_Clock_Source | |
| RCC_APB_Clock_Source | |
| RCC_ADC_clock_source | |
| RCC_CEC_clock_source | |
| RCC_I2C_clock_source | |
| RCC_USART_clock_source | |
| RCC_Interrupt_Source | |
| RCC_LSE_Configuration | |
| RCC_RTC_Clock_Source | |
| RCC_LSE_Drive_Configuration | |
| RCC_AHB_Peripherals | |
| RCC_APB2_Peripherals | |
| RCC_APB1_Peripherals | |
| RCC_MCO_Clock_Source | |
| RCC_Flag | |
| RCC_Private_Functions | |
| Internal and external clocks, PLL, CSS and MCO configuration functions | Internal and external clocks, PLL, CSS and MCO configuration functions |
| System AHB and APB busses clocks configuration functions | System, AHB and APB busses clocks configuration functions |
| Peripheral clocks configuration functions | Peripheral clocks configuration functions |
| Interrupts and flags management functions | Interrupts and flags management functions |
| RTC | RTC driver modules |
| RTC_Exported_Constants | |
| RTC_Hour_Formats | |
| RTC_Asynchronous_Predivider | |
| RTC_Synchronous_Predivider | |
| RTC_Time_Definitions | |
| RTC_AM_PM_Definitions | |
| RTC_Year_Date_Definitions | |
| RTC_Month_Date_Definitions | |
| RTC_WeekDay_Definitions | |
| RTC_Alarm_Definitions | |
| RTC_AlarmDateWeekDay_Definitions | |
| RTC_AlarmMask_Definitions | |
| RTC_Alarms_Definitions | |
| Definitions. | |
| RTC_Alarm_Sub_Seconds_Value | |
| RTC_Time_Stamp_Edges_definitions | |
| RTC_Output_selection_Definitions | |
| RTC_Output_Polarity_Definitions | |
| RTC_Calib_Output_selection_Definitions | |
| RTC_Smooth_calib_period_Definitions | |
| RTC_Smooth_calib_Plus_pulses_Definitions | |
| RTC_Smooth_calib_Minus_pulses_Definitions | |
| RTC_DayLightSaving_Definitions | |
| RTC_Tamper_Trigger_Definitions | |
| RTC_Tamper_Filter_Definitions | |
| RTC_Tamper_Sampling_Frequencies_Definitions | |
| RTC_Tamper_Pin_Precharge_Duration_Definitions | |
| RTC_Tamper_Pins_Definitions | |
| RTC_Output_Type_ALARM_OUT | |
| RTC_Add_1_Second_Parameter_Definitions | |
| RTC_Substract_Fraction_Of_Second_Value | |
| RTC_Backup_Registers_Definitions | |
| RTC_Input_parameter_format_definitions | |
| RTC_Flags_Definitions | |
| RTC_Interrupts_Definitions | |
| RTC_Private_Functions | |
| Initialization and Configuration functions | Initialization and Configuration functions |
| Time and Date configuration functions | Time and Date configuration functions |
| Alarms configuration functions | Alarms (Alarm A) configuration functions |
| Daylight Saving configuration functions | Daylight Saving configuration functions |
| Output pin Configuration function | Output pin Configuration function |
| Digital Calibration configuration functions | Digital Calibration configuration functions |
| Tampers configuration functions | Tampers configuration functions |
| Backup Data Registers configuration functions | Backup Data Registers configuration functions |
| Output Type Config configuration functions | Output Type Config configuration functions |
| Shift control synchronisation functions | Shift control synchronisation functions |
| Interrupts and flags management functions | Interrupts and flags management functions |
| SPI | SPI driver modules |
| SPI_Exported_Constants | |
| SPI_data_direction | |
| SPI_mode | |
| SPI_data_size | |
| SPI_CRC_length | |
| SPI_Clock_Polarity | |
| SPI_Clock_Phase | |
| SPI_Slave_Select_management | |
| SPI_BaudRate_Prescaler | |
| SPI_MSB_LSB_transmission | |
| SPI_I2S_Mode | |
| SPI_I2S_Standard | |
| SPI_I2S_Data_Format | |
| SPI_I2S_MCLK_Output | |
| SPI_I2S_Audio_Frequency | |
| SPI_I2S_Clock_Polarity | |
| SPI_FIFO_reception_threshold | |
| SPI_I2S_DMA_transfer_requests | |
| SPI_last_DMA_transfers | |
| SPI_NSS_internal_software_management | |
| SPI_CRC_Transmit_Receive | |
| SPI_direction_transmit_receive | |
| SPI_I2S_interrupts_definition | |
| SPI_transmission_fifo_status_level | |
| SPI_reception_fifo_status_level | |
| SPI_I2S_flags_definition | |
| SPI_CRC_polynomial | |
| SPI_Private_Functions | |
| Initialization and Configuration functions | Initialization and Configuration functions |
| Data transfers functions | Data transfers functions |
| Hardware CRC Calculation functions | Hardware CRC Calculation functions |
| DMA transfers management functions | DMA transfers management functions |
| Interrupts and flags management functions | Interrupts and flags management functions |
| SYSCFG | SYSCFG driver modules |
| SYSCFG_Exported_Constants | |
| SYSCFG_EXTI_Port_Sources | |
| SYSCFG_EXTI_Pin_sources | |
| SYSCFG_Memory_Remap_Config | |
| SYSCFG_DMA_Remap_Config | |
| SYSCFG_I2C_FastModePlus_Config | |
| SYSCFG_Lock_Config | |
| SYSCFG_flags_definition | |
| SYSCFG_Private_Functions | |
| SYSCFG Initialization and Configuration functions | SYSCFG Initialization and Configuration functions |
| TIM | TIM driver modules |
| TIM_Exported_constants | TIM Input Capture Init structure definition |
| TIM_Output_Compare_and_PWM_modes | |
| TIM_One_Pulse_Mode | |
| TIM_Channel | |
| TIM_Clock_Division_CKD | |
| TIM_Counter_Mode | |
| TIM_Output_Compare_Polarity | |
| TIM_Output_Compare_N_Polarity | |
| TIM_Output_Compare_state | |
| TIM_Output_Compare_N_state | |
| TIM_Capture_Compare_state | |
| TIM_Capture_Compare_N_state | |
| TIM_Break_Input_enable_disable | |
| TIM_Break_Polarity | |
| TIM_AOE_Bit_Set_Reset | |
| TIM_Lock_level | |
| TIM_OSSI_Off_State_Selection_for_Idle_mode_state | |
| TIM_OSSR_Off_State_Selection_for_Run_mode_state | |
| TIM_Output_Compare_Idle_State | |
| TIM_Output_Compare_N_Idle_State | |
| TIM_Input_Capture_Polarity | |
| TIM_Input_Capture_Selection | |
| TIM_Input_Capture_Prescaler | |
| TIM_interrupt_sources | |
| TIM_DMA_Base_address | |
| TIM_DMA_Burst_Length | |
| TIM_DMA_sources | |
| TIM_External_Trigger_Prescaler | |
| TIM_Internal_Trigger_Selection | |
| TIM_TIx_External_Clock_Source | |
| TIM_External_Trigger_Polarity | |
| TIM_Prescaler_Reload_Mode | |
| TIM_Forced_Action | |
| TIM_Encoder_Mode | |
| TIM_Event_Source | |
| TIM_Update_Source | |
| TIM_Output_Compare_Preload_State | |
| TIM_Output_Compare_Fast_State | |
| TIM_Output_Compare_Clear_State | |
| TIM_Trigger_Output_Source | |
| TIM_Slave_Mode | |
| TIM_Master_Slave_Mode | |
| TIM_Flags | |
| TIM_Input_Capture_Filer_Value | |
| TIM_External_Trigger_Filter | |
| TIM_OCReferenceClear | |
| TIM_Remap | |
| TIM_Legacy | |
| TIM_Private_Functions | |
| TimeBase management functions | TimeBase management functions |
| Advanced-control timers (TIM1) specific features | Advanced-control timers (TIM1) specific features |
| Output Compare management functions | Output Compare management functions |
| Input Capture management functions | Input Capture management functions |
| Interrupts DMA and flags management functions | Interrupts, DMA and flags management functions |
| Clocks management functions | Clocks management functions |
| Synchronization management functions | Synchronization management functions |
| Specific interface management functions | Specific interface management functions |
| Specific remapping management function | Specific remapping management function |
| USART | USART driver modules |
| USART_Exported_Constants | |
| USART_Word_Length | |
| USART_Stop_Bits | |
| USART_Parity | |
| USART_Mode | |
| USART_Hardware_Flow_Control | |
| USART_Clock | |
| USART_Clock_Polarity | |
| USART_Clock_Phase | |
| USART_Last_Bit | |
| USART_DMA_Requests | |
| USART_DMA_Recception_Error | |
| USART_MuteMode_WakeUp_methods | |
| USART_Address_Detection | |
| USART_StopMode_WakeUp_methods | |
| USART_LIN_Break_Detection_Length | |
| USART_IrDA_Low_Power | |
| USART_DE_Polarity | |
| USART_Inversion_Pins | |
| USART_AutoBaudRate_Mode | |
| USART_OVR_DETECTION | |
| USART_Request | |
| USART_Flags | |
| USART_Interrupt_definition | USART Interrupt definition USART_IT possible values Elements values convention: 0xZZZZYYXX XX: Position of the corresponding Interrupt YY: Register index ZZZZ: Flag position |
| USART_Global_definition | |
| USART_Private_Functions | |
| Initialization and Configuration functions | Initialization and Configuration functions |
| STOP Mode functions | STOP Mode functions |
| AutoBaudRate functions | AutoBaudRate functions |
| Data transfers functions | Data transfers functions |
| MultiProcessor Communication functions | Multi-Processor Communication functions |
| LIN mode functions | LIN mode functions |
| Halfduplex mode function | Half-duplex mode function |
| Smartcard mode functions | Smartcard mode functions |
| IrDA mode functions | IrDA mode functions |
| RS485 mode function | RS485 mode function |
| DMA transfers management functions | DMA transfers management functions |
| Interrupts and flags management functions | Interrupts and flags management functions |
| WWDG | WWDG driver modules |
| WWDG_Exported_Constants | |
| WWDG_Prescaler | |
| WWDG_Private_Functions | |
| Prescaler, Refresh window and Counter configuration functions | Prescaler, Refresh window and Counter configuration functions |
| WWDG activation functions | WWDG activation functions |
| Interrupts and flags management functions | Interrupts and flags management functions |
1.8.3.1 
