Peripherals Configuration.
More...
|
void | DBGMCU_Config (uint32_t DBGMCU_Periph, FunctionalState NewState) |
| Configures low power mode behavior when the MCU is in Debug mode. More...
|
|
void | DBGMCU_APB1PeriphConfig (uint32_t DBGMCU_Periph, FunctionalState NewState) |
| Configures APB1 peripheral behavior when the MCU is in Debug mode. More...
|
|
void | DBGMCU_APB2PeriphConfig (uint32_t DBGMCU_Periph, FunctionalState NewState) |
| Configures APB2 peripheral behavior when the MCU is in Debug mode. More...
|
|
Peripherals Configuration.
==============================================================================
##### Peripherals Configuration functions #####
==============================================================================
void DBGMCU_APB1PeriphConfig |
( |
uint32_t |
DBGMCU_Periph, |
|
|
FunctionalState |
NewState |
|
) |
| |
Configures APB1 peripheral behavior when the MCU is in Debug mode.
- Parameters
-
DBGMCU_Periph,: | specifies the APB1 peripheral. This parameter can be any combination of the following values:
- DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted
- DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted
- DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted
- DBGMCU_TIM14_STOP: TIM14 counter stopped when Core is halted
- DBGMCU_RTC_STOP: RTC Calendar and Wakeup counter stopped when Core is halted.
- DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted
- DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted
- DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped when Core is halted
|
NewState,: | new state of the specified APB1 peripheral in Debug mode. This parameter can be: ENABLE or DISABLE. |
- Return values
-
void DBGMCU_APB2PeriphConfig |
( |
uint32_t |
DBGMCU_Periph, |
|
|
FunctionalState |
NewState |
|
) |
| |
Configures APB2 peripheral behavior when the MCU is in Debug mode.
- Parameters
-
DBGMCU_Periph,: | specifies the APB2 peripheral. This parameter can be any combination of the following values:
- DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted
- DBGMCU_TIM15_STOP: TIM15 counter stopped when Core is halted
- DBGMCU_TIM16_STOP: TIM16 counter stopped when Core is halted
- DBGMCU_TIM17_STOP: TIM17 counter stopped when Core is halted
|
NewState,: | new state of the specified APB2 peripheral in Debug mode. This parameter can be: ENABLE or DISABLE. |
- Return values
-
void DBGMCU_Config |
( |
uint32_t |
DBGMCU_Periph, |
|
|
FunctionalState |
NewState |
|
) |
| |
Configures low power mode behavior when the MCU is in Debug mode.
- Parameters
-
DBGMCU_Periph,: | specifies the low power mode. This parameter can be any combination of the following values:
- DBGMCU_STOP: Keep debugger connection during STOP mode
- DBGMCU_STANDBY: Keep debugger connection during STANDBY mode
|
NewState,: | new state of the specified low power mode in Debug mode. This parameter can be: ENABLE or DISABLE. |
- Return values
-