STM32F0 Standard Peripheral bibliotheek  1.0
ST Microelectronics standard peripheral bibliotheek documentatie voor de STM32F0 familie
 All Data Structures Files Functions Variables Enumerations Enumerator Groups
Modules | Macros | Functions
DBGMCU
STM32F0xx_StdPeriph_Driver

DBGMCU driver modules. More...

Modules

 DBGMCU_Exported_Constants
 
 DBGMCU_Private_Functions
 

Macros

#define IDCODE_DEVID_MASK   ((uint32_t)0x00000FFF)
 

Functions

uint32_t DBGMCU_GetREVID (void)
 Returns the device revision identifier. More...
 
uint32_t DBGMCU_GetDEVID (void)
 Returns the device identifier. More...
 
void DBGMCU_Config (uint32_t DBGMCU_Periph, FunctionalState NewState)
 Configures low power mode behavior when the MCU is in Debug mode. More...
 
void DBGMCU_APB1PeriphConfig (uint32_t DBGMCU_Periph, FunctionalState NewState)
 Configures APB1 peripheral behavior when the MCU is in Debug mode. More...
 
void DBGMCU_APB2PeriphConfig (uint32_t DBGMCU_Periph, FunctionalState NewState)
 Configures APB2 peripheral behavior when the MCU is in Debug mode. More...
 

Detailed Description

DBGMCU driver modules.

Function Documentation

void DBGMCU_APB1PeriphConfig ( uint32_t  DBGMCU_Periph,
FunctionalState  NewState 
)

Configures APB1 peripheral behavior when the MCU is in Debug mode.

Parameters
DBGMCU_Periph,:specifies the APB1 peripheral. This parameter can be any combination of the following values:
  • DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted
  • DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted
  • DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted
  • DBGMCU_TIM14_STOP: TIM14 counter stopped when Core is halted
  • DBGMCU_RTC_STOP: RTC Calendar and Wakeup counter stopped when Core is halted.
  • DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted
  • DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted
  • DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped when Core is halted
NewState,:new state of the specified APB1 peripheral in Debug mode. This parameter can be: ENABLE or DISABLE.
Return values
None
void DBGMCU_APB2PeriphConfig ( uint32_t  DBGMCU_Periph,
FunctionalState  NewState 
)

Configures APB2 peripheral behavior when the MCU is in Debug mode.

Parameters
DBGMCU_Periph,:specifies the APB2 peripheral. This parameter can be any combination of the following values:
  • DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted
  • DBGMCU_TIM15_STOP: TIM15 counter stopped when Core is halted
  • DBGMCU_TIM16_STOP: TIM16 counter stopped when Core is halted
  • DBGMCU_TIM17_STOP: TIM17 counter stopped when Core is halted
NewState,:new state of the specified APB2 peripheral in Debug mode. This parameter can be: ENABLE or DISABLE.
Return values
None
void DBGMCU_Config ( uint32_t  DBGMCU_Periph,
FunctionalState  NewState 
)

Configures low power mode behavior when the MCU is in Debug mode.

Parameters
DBGMCU_Periph,:specifies the low power mode. This parameter can be any combination of the following values:
  • DBGMCU_STOP: Keep debugger connection during STOP mode
  • DBGMCU_STANDBY: Keep debugger connection during STANDBY mode
NewState,:new state of the specified low power mode in Debug mode. This parameter can be: ENABLE or DISABLE.
Return values
None
uint32_t DBGMCU_GetDEVID ( void  )

Returns the device identifier.

Parameters
None
Return values
Deviceidentifier
uint32_t DBGMCU_GetREVID ( void  )

Returns the device revision identifier.

Parameters
None
Return values
Devicerevision identifier