STM32F37 Standard Peripheral bibliotheek  1.0
ST Microelectronics bibliotheek documentatie voor de STM32F37 Standard Peripheral Library
 All Data Structures Files Functions Variables Enumerations Enumerator Groups
TIM_BDTRInitTypeDef Struct Reference

TIM_BDTR structure definition. More...

#include <stm32f37x_tim.h>

Data Fields

uint16_t TIM_OSSRState
uint16_t TIM_OSSIState
uint16_t TIM_LOCKLevel
uint16_t TIM_DeadTime
uint16_t TIM_Break
uint16_t TIM_BreakPolarity
uint16_t TIM_AutomaticOutput

Detailed Description

TIM_BDTR structure definition.

This structure is used only with TIM15, TIM16 and TIM17.

Field Documentation

uint16_t TIM_AutomaticOutput
  Specifies whether the TIM Automatic Output feature is enabled or not. 

This parameter can be a value of TIM_AOE_Bit_Set_Reset

uint16_t TIM_Break
            Specifies whether the TIM Break input is enabled or not. 

This parameter can be a value of TIM_Break_Input_enable_disable

uint16_t TIM_BreakPolarity
    Specifies the TIM Break Input pin polarity.

This parameter can be a value of TIM_Break_Polarity

uint16_t TIM_DeadTime
         Specifies the delay time between the switching-off and the

switching-on of the outputs. This parameter can be a number between 0x00 and 0xFF

uint16_t TIM_LOCKLevel
        Specifies the LOCK level parameters.

This parameter can be a value of TIM_Lock_level

uint16_t TIM_OSSIState
        Specifies the Off-State used in Idle state.

This parameter can be a value of TIM_OSSI_Off_State_Selection_for_Idle_mode_state

uint16_t TIM_OSSRState
        Specifies the Off-State selection used in Run mode.

This parameter can be a value of TIM_OSSR_Off_State_Selection_for_Run_mode_state

The documentation for this struct was generated from the following file: