 |
STM32F1 Standard Peripheral bibliotheek
1.0
ST Microelectronics bibliotheek documentatie voor de STM32F1 Standard Peripheral Library
|
|
STM32F1 Standard Peripheral bibliotheek
1.0
ST Microelectronics bibliotheek documentatie voor de STM32F1 Standard Peripheral Library
|
This file contains all the functions prototypes for the SDIO firmware library. More...
#include "stm32f10x.h"Go to the source code of this file.
Data Structures | |
| struct | SDIO_InitTypeDef |
| struct | SDIO_CmdInitTypeDef |
| struct | SDIO_DataInitTypeDef |
Macros | |
| #define | SDIO_ClockEdge_Rising ((uint32_t)0x00000000) |
| #define | SDIO_ClockEdge_Falling ((uint32_t)0x00002000) |
| #define | IS_SDIO_CLOCK_EDGE(EDGE) |
| #define | SDIO_ClockBypass_Disable ((uint32_t)0x00000000) |
| #define | SDIO_ClockBypass_Enable ((uint32_t)0x00000400) |
| #define | IS_SDIO_CLOCK_BYPASS(BYPASS) |
| #define | SDIO_ClockPowerSave_Disable ((uint32_t)0x00000000) |
| #define | SDIO_ClockPowerSave_Enable ((uint32_t)0x00000200) |
| #define | IS_SDIO_CLOCK_POWER_SAVE(SAVE) |
| #define | SDIO_BusWide_1b ((uint32_t)0x00000000) |
| #define | SDIO_BusWide_4b ((uint32_t)0x00000800) |
| #define | SDIO_BusWide_8b ((uint32_t)0x00001000) |
| #define | IS_SDIO_BUS_WIDE(WIDE) |
| #define | SDIO_HardwareFlowControl_Disable ((uint32_t)0x00000000) |
| #define | SDIO_HardwareFlowControl_Enable ((uint32_t)0x00004000) |
| #define | IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) |
| #define | SDIO_PowerState_OFF ((uint32_t)0x00000000) |
| #define | SDIO_PowerState_ON ((uint32_t)0x00000003) |
| #define | IS_SDIO_POWER_STATE(STATE) (((STATE) == SDIO_PowerState_OFF) || ((STATE) == SDIO_PowerState_ON)) |
| #define | SDIO_IT_CCRCFAIL ((uint32_t)0x00000001) |
| #define | SDIO_IT_DCRCFAIL ((uint32_t)0x00000002) |
| #define | SDIO_IT_CTIMEOUT ((uint32_t)0x00000004) |
| #define | SDIO_IT_DTIMEOUT ((uint32_t)0x00000008) |
| #define | SDIO_IT_TXUNDERR ((uint32_t)0x00000010) |
| #define | SDIO_IT_RXOVERR ((uint32_t)0x00000020) |
| #define | SDIO_IT_CMDREND ((uint32_t)0x00000040) |
| #define | SDIO_IT_CMDSENT ((uint32_t)0x00000080) |
| #define | SDIO_IT_DATAEND ((uint32_t)0x00000100) |
| #define | SDIO_IT_STBITERR ((uint32_t)0x00000200) |
| #define | SDIO_IT_DBCKEND ((uint32_t)0x00000400) |
| #define | SDIO_IT_CMDACT ((uint32_t)0x00000800) |
| #define | SDIO_IT_TXACT ((uint32_t)0x00001000) |
| #define | SDIO_IT_RXACT ((uint32_t)0x00002000) |
| #define | SDIO_IT_TXFIFOHE ((uint32_t)0x00004000) |
| #define | SDIO_IT_RXFIFOHF ((uint32_t)0x00008000) |
| #define | SDIO_IT_TXFIFOF ((uint32_t)0x00010000) |
| #define | SDIO_IT_RXFIFOF ((uint32_t)0x00020000) |
| #define | SDIO_IT_TXFIFOE ((uint32_t)0x00040000) |
| #define | SDIO_IT_RXFIFOE ((uint32_t)0x00080000) |
| #define | SDIO_IT_TXDAVL ((uint32_t)0x00100000) |
| #define | SDIO_IT_RXDAVL ((uint32_t)0x00200000) |
| #define | SDIO_IT_SDIOIT ((uint32_t)0x00400000) |
| #define | SDIO_IT_CEATAEND ((uint32_t)0x00800000) |
| #define | IS_SDIO_IT(IT) ((((IT) & (uint32_t)0xFF000000) == 0x00) && ((IT) != (uint32_t)0x00)) |
| #define | IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40) |
| #define | SDIO_Response_No ((uint32_t)0x00000000) |
| #define | SDIO_Response_Short ((uint32_t)0x00000040) |
| #define | SDIO_Response_Long ((uint32_t)0x000000C0) |
| #define | IS_SDIO_RESPONSE(RESPONSE) |
| #define | SDIO_Wait_No ((uint32_t)0x00000000) |
| #define | SDIO_Wait_IT ((uint32_t)0x00000100) |
| #define | SDIO_Wait_Pend ((uint32_t)0x00000200) |
| #define | IS_SDIO_WAIT(WAIT) |
| #define | SDIO_CPSM_Disable ((uint32_t)0x00000000) |
| #define | SDIO_CPSM_Enable ((uint32_t)0x00000400) |
| #define | IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_Enable) || ((CPSM) == SDIO_CPSM_Disable)) |
| #define | SDIO_RESP1 ((uint32_t)0x00000000) |
| #define | SDIO_RESP2 ((uint32_t)0x00000004) |
| #define | SDIO_RESP3 ((uint32_t)0x00000008) |
| #define | SDIO_RESP4 ((uint32_t)0x0000000C) |
| #define | IS_SDIO_RESP(RESP) |
| #define | IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF) |
| #define | SDIO_DataBlockSize_1b ((uint32_t)0x00000000) |
| #define | SDIO_DataBlockSize_2b ((uint32_t)0x00000010) |
| #define | SDIO_DataBlockSize_4b ((uint32_t)0x00000020) |
| #define | SDIO_DataBlockSize_8b ((uint32_t)0x00000030) |
| #define | SDIO_DataBlockSize_16b ((uint32_t)0x00000040) |
| #define | SDIO_DataBlockSize_32b ((uint32_t)0x00000050) |
| #define | SDIO_DataBlockSize_64b ((uint32_t)0x00000060) |
| #define | SDIO_DataBlockSize_128b ((uint32_t)0x00000070) |
| #define | SDIO_DataBlockSize_256b ((uint32_t)0x00000080) |
| #define | SDIO_DataBlockSize_512b ((uint32_t)0x00000090) |
| #define | SDIO_DataBlockSize_1024b ((uint32_t)0x000000A0) |
| #define | SDIO_DataBlockSize_2048b ((uint32_t)0x000000B0) |
| #define | SDIO_DataBlockSize_4096b ((uint32_t)0x000000C0) |
| #define | SDIO_DataBlockSize_8192b ((uint32_t)0x000000D0) |
| #define | SDIO_DataBlockSize_16384b ((uint32_t)0x000000E0) |
| #define | IS_SDIO_BLOCK_SIZE(SIZE) |
| #define | SDIO_TransferDir_ToCard ((uint32_t)0x00000000) |
| #define | SDIO_TransferDir_ToSDIO ((uint32_t)0x00000002) |
| #define | IS_SDIO_TRANSFER_DIR(DIR) |
| #define | SDIO_TransferMode_Block ((uint32_t)0x00000000) |
| #define | SDIO_TransferMode_Stream ((uint32_t)0x00000004) |
| #define | IS_SDIO_TRANSFER_MODE(MODE) |
| #define | SDIO_DPSM_Disable ((uint32_t)0x00000000) |
| #define | SDIO_DPSM_Enable ((uint32_t)0x00000001) |
| #define | IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_Enable) || ((DPSM) == SDIO_DPSM_Disable)) |
| #define | SDIO_FLAG_CCRCFAIL ((uint32_t)0x00000001) |
| #define | SDIO_FLAG_DCRCFAIL ((uint32_t)0x00000002) |
| #define | SDIO_FLAG_CTIMEOUT ((uint32_t)0x00000004) |
| #define | SDIO_FLAG_DTIMEOUT ((uint32_t)0x00000008) |
| #define | SDIO_FLAG_TXUNDERR ((uint32_t)0x00000010) |
| #define | SDIO_FLAG_RXOVERR ((uint32_t)0x00000020) |
| #define | SDIO_FLAG_CMDREND ((uint32_t)0x00000040) |
| #define | SDIO_FLAG_CMDSENT ((uint32_t)0x00000080) |
| #define | SDIO_FLAG_DATAEND ((uint32_t)0x00000100) |
| #define | SDIO_FLAG_STBITERR ((uint32_t)0x00000200) |
| #define | SDIO_FLAG_DBCKEND ((uint32_t)0x00000400) |
| #define | SDIO_FLAG_CMDACT ((uint32_t)0x00000800) |
| #define | SDIO_FLAG_TXACT ((uint32_t)0x00001000) |
| #define | SDIO_FLAG_RXACT ((uint32_t)0x00002000) |
| #define | SDIO_FLAG_TXFIFOHE ((uint32_t)0x00004000) |
| #define | SDIO_FLAG_RXFIFOHF ((uint32_t)0x00008000) |
| #define | SDIO_FLAG_TXFIFOF ((uint32_t)0x00010000) |
| #define | SDIO_FLAG_RXFIFOF ((uint32_t)0x00020000) |
| #define | SDIO_FLAG_TXFIFOE ((uint32_t)0x00040000) |
| #define | SDIO_FLAG_RXFIFOE ((uint32_t)0x00080000) |
| #define | SDIO_FLAG_TXDAVL ((uint32_t)0x00100000) |
| #define | SDIO_FLAG_RXDAVL ((uint32_t)0x00200000) |
| #define | SDIO_FLAG_SDIOIT ((uint32_t)0x00400000) |
| #define | SDIO_FLAG_CEATAEND ((uint32_t)0x00800000) |
| #define | IS_SDIO_FLAG(FLAG) |
| #define | IS_SDIO_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFF3FF800) == 0x00) && ((FLAG) != (uint32_t)0x00)) |
| #define | IS_SDIO_GET_IT(IT) |
| #define | IS_SDIO_CLEAR_IT(IT) ((((IT) & (uint32_t)0xFF3FF800) == 0x00) && ((IT) != (uint32_t)0x00)) |
| #define | SDIO_ReadWaitMode_CLK ((uint32_t)0x00000001) |
| #define | SDIO_ReadWaitMode_DATA2 ((uint32_t)0x00000000) |
| #define | IS_SDIO_READWAIT_MODE(MODE) |
Functions | |
| void | SDIO_DeInit (void) |
| Deinitializes the SDIO peripheral registers to their default reset values. More... | |
| void | SDIO_Init (SDIO_InitTypeDef *SDIO_InitStruct) |
| Initializes the SDIO peripheral according to the specified parameters in the SDIO_InitStruct. More... | |
| void | SDIO_StructInit (SDIO_InitTypeDef *SDIO_InitStruct) |
| Fills each SDIO_InitStruct member with its default value. More... | |
| void | SDIO_ClockCmd (FunctionalState NewState) |
| Enables or disables the SDIO Clock. More... | |
| void | SDIO_SetPowerState (uint32_t SDIO_PowerState) |
| Sets the power status of the controller. More... | |
| uint32_t | SDIO_GetPowerState (void) |
| Gets the power status of the controller. More... | |
| void | SDIO_ITConfig (uint32_t SDIO_IT, FunctionalState NewState) |
| Enables or disables the SDIO interrupts. More... | |
| void | SDIO_DMACmd (FunctionalState NewState) |
| Enables or disables the SDIO DMA request. More... | |
| void | SDIO_SendCommand (SDIO_CmdInitTypeDef *SDIO_CmdInitStruct) |
| Initializes the SDIO Command according to the specified parameters in the SDIO_CmdInitStruct and send the command. More... | |
| void | SDIO_CmdStructInit (SDIO_CmdInitTypeDef *SDIO_CmdInitStruct) |
| Fills each SDIO_CmdInitStruct member with its default value. More... | |
| uint8_t | SDIO_GetCommandResponse (void) |
| Returns command index of last command for which response received. More... | |
| uint32_t | SDIO_GetResponse (uint32_t SDIO_RESP) |
| Returns response received from the card for the last command. More... | |
| void | SDIO_DataConfig (SDIO_DataInitTypeDef *SDIO_DataInitStruct) |
| Initializes the SDIO data path according to the specified parameters in the SDIO_DataInitStruct. More... | |
| void | SDIO_DataStructInit (SDIO_DataInitTypeDef *SDIO_DataInitStruct) |
| Fills each SDIO_DataInitStruct member with its default value. More... | |
| uint32_t | SDIO_GetDataCounter (void) |
| Returns number of remaining data bytes to be transferred. More... | |
| uint32_t | SDIO_ReadData (void) |
| Read one data word from Rx FIFO. More... | |
| void | SDIO_WriteData (uint32_t Data) |
| Write one data word to Tx FIFO. More... | |
| uint32_t | SDIO_GetFIFOCount (void) |
| Returns the number of words left to be written to or read from FIFO. More... | |
| void | SDIO_StartSDIOReadWait (FunctionalState NewState) |
| Starts the SD I/O Read Wait operation. More... | |
| void | SDIO_StopSDIOReadWait (FunctionalState NewState) |
| Stops the SD I/O Read Wait operation. More... | |
| void | SDIO_SetSDIOReadWaitMode (uint32_t SDIO_ReadWaitMode) |
| Sets one of the two options of inserting read wait interval. More... | |
| void | SDIO_SetSDIOOperation (FunctionalState NewState) |
| Enables or disables the SD I/O Mode Operation. More... | |
| void | SDIO_SendSDIOSuspendCmd (FunctionalState NewState) |
| Enables or disables the SD I/O Mode suspend command sending. More... | |
| void | SDIO_CommandCompletionCmd (FunctionalState NewState) |
| Enables or disables the command completion signal. More... | |
| void | SDIO_CEATAITCmd (FunctionalState NewState) |
| Enables or disables the CE-ATA interrupt. More... | |
| void | SDIO_SendCEATACmd (FunctionalState NewState) |
| Sends CE-ATA command (CMD61). More... | |
| FlagStatus | SDIO_GetFlagStatus (uint32_t SDIO_FLAG) |
| Checks whether the specified SDIO flag is set or not. More... | |
| void | SDIO_ClearFlag (uint32_t SDIO_FLAG) |
| Clears the SDIO's pending flags. More... | |
| ITStatus | SDIO_GetITStatus (uint32_t SDIO_IT) |
| Checks whether the specified SDIO interrupt has occurred or not. More... | |
| void | SDIO_ClearITPendingBit (uint32_t SDIO_IT) |
| Clears the SDIO’s interrupt pending bits. More... | |
This file contains all the functions prototypes for the SDIO firmware library.
THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
1.8.3.1