STM32F1 Standard Peripheral bibliotheek
1.0
ST Microelectronics bibliotheek documentatie voor de STM32F1 Standard Peripheral Library
|
Data Fields | |
uint32_t | SDIO_ClockEdge |
uint32_t | SDIO_ClockBypass |
uint32_t | SDIO_ClockPowerSave |
uint32_t | SDIO_BusWide |
uint32_t | SDIO_HardwareFlowControl |
uint8_t | SDIO_ClockDiv |
uint32_t SDIO_BusWide |
Specifies the SDIO bus width.
This parameter can be a value of SDIO_Bus_Wide
uint32_t SDIO_ClockBypass |
Specifies whether the SDIO Clock divider bypass is
enabled or disabled. This parameter can be a value of SDIO_Clock_Bypass
uint8_t SDIO_ClockDiv |
Specifies the clock frequency of the SDIO controller.
This parameter can be a value between 0x00 and 0xFF.
uint32_t SDIO_ClockEdge |
Specifies the clock transition on which the bit capture is made.
This parameter can be a value of SDIO_Clock_Edge
uint32_t SDIO_ClockPowerSave |
Specifies whether SDIO Clock output is enabled or
disabled when the bus is idle. This parameter can be a value of SDIO_Clock_Power_Save
uint32_t SDIO_HardwareFlowControl |
Specifies whether the SDIO hardware flow control is enabled or disabled.
This parameter can be a value of SDIO_Hardware_Flow_Control