stm32f4xx_syscfg.h File Reference

This file contains all the functions prototypes for the SYSCFG firmware library. More...

#include "stm32f4xx.h"

Go to the source code of this file.

Macros
#define	EXTI_PortSourceGPIOA   ((uint8_t)0x00)
#define	EXTI_PortSourceGPIOB   ((uint8_t)0x01)
#define	EXTI_PortSourceGPIOC   ((uint8_t)0x02)
#define	EXTI_PortSourceGPIOD   ((uint8_t)0x03)
#define	EXTI_PortSourceGPIOE   ((uint8_t)0x04)
#define	EXTI_PortSourceGPIOF   ((uint8_t)0x05)
#define	EXTI_PortSourceGPIOG   ((uint8_t)0x06)
#define	EXTI_PortSourceGPIOH   ((uint8_t)0x07)
#define	EXTI_PortSourceGPIOI   ((uint8_t)0x08)
#define	IS_EXTI_PORT_SOURCE(PORTSOURCE)
#define	EXTI_PinSource0   ((uint8_t)0x00)
#define	EXTI_PinSource1   ((uint8_t)0x01)
#define	EXTI_PinSource2   ((uint8_t)0x02)
#define	EXTI_PinSource3   ((uint8_t)0x03)
#define	EXTI_PinSource4   ((uint8_t)0x04)
#define	EXTI_PinSource5   ((uint8_t)0x05)
#define	EXTI_PinSource6   ((uint8_t)0x06)
#define	EXTI_PinSource7   ((uint8_t)0x07)
#define	EXTI_PinSource8   ((uint8_t)0x08)
#define	EXTI_PinSource9   ((uint8_t)0x09)
#define	EXTI_PinSource10   ((uint8_t)0x0A)
#define	EXTI_PinSource11   ((uint8_t)0x0B)
#define	EXTI_PinSource12   ((uint8_t)0x0C)
#define	EXTI_PinSource13   ((uint8_t)0x0D)
#define	EXTI_PinSource14   ((uint8_t)0x0E)
#define	EXTI_PinSource15   ((uint8_t)0x0F)
#define	IS_EXTI_PIN_SOURCE(PINSOURCE)
#define	SYSCFG_MemoryRemap_Flash   ((uint8_t)0x00)
#define	SYSCFG_MemoryRemap_SystemFlash   ((uint8_t)0x01)
#define	SYSCFG_MemoryRemap_FSMC   ((uint8_t)0x02)
#define	SYSCFG_MemoryRemap_SRAM   ((uint8_t)0x03)
#define	IS_SYSCFG_MEMORY_REMAP_CONFING(REMAP)
#define	SYSCFG_ETH_MediaInterface_MII   ((uint32_t)0x00000000)
#define	SYSCFG_ETH_MediaInterface_RMII   ((uint32_t)0x00000001)
#define	IS_SYSCFG_ETH_MEDIA_INTERFACE(INTERFACE)

Functions
void	SYSCFG_DeInit (void)
	Deinitializes the Alternate Functions (remap and EXTI configuration) registers to their default reset values. More...
void	SYSCFG_MemoryRemapConfig (uint8_t SYSCFG_MemoryRemap)
	Changes the mapping of the specified pin. More...
void	SYSCFG_EXTILineConfig (uint8_t EXTI_PortSourceGPIOx, uint8_t EXTI_PinSourcex)
	Selects the GPIO pin used as EXTI Line. More...
void	SYSCFG_ETH_MediaInterfaceConfig (uint32_t SYSCFG_ETH_MediaInterface)
	Selects the ETHERNET media interface. More...
void	SYSCFG_CompensationCellCmd (FunctionalState NewState)
	Enables or disables the I/O Compensation Cell. More...
FlagStatus	SYSCFG_GetCompensationCellStatus (void)
	Checks whether the I/O Compensation Cell ready flag is set or not. More...

Detailed Description

This file contains all the functions prototypes for the SYSCFG firmware library.

Author

MCD Application Team

Version

V1.0.2

Date

05-March-2012

Attention

© COPYRIGHT 2012 STMicroelectronics

Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); You may not use this file except in compliance with the License. You may obtain a copy of the License at:

   http://www.st.com/software_license_agreement_liberty_v2

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.