Advanced-control timers (TIM1 and TIM8) specific features

Advanced-control timers (TIM1 and TIM8) specific features. More...

Functions
void	TIM_BDTRConfig (TIM_TypeDef *TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct)
	Configures the Break feature, dead time, Lock level, OSSI/OSSR State and the AOE(automatic output enable). More...
void	TIM_BDTRStructInit (TIM_BDTRInitTypeDef *TIM_BDTRInitStruct)
	Fills each TIM_BDTRInitStruct member with its default value. More...
void	TIM_CtrlPWMOutputs (TIM_TypeDef *TIMx, FunctionalState NewState)
	Enables or disables the TIM peripheral Main Outputs. More...
void	TIM_SelectCOM (TIM_TypeDef *TIMx, FunctionalState NewState)
	Selects the TIM peripheral Commutation event. More...
void	TIM_CCPreloadControl (TIM_TypeDef *TIMx, FunctionalState NewState)
	Sets or Resets the TIM peripheral Capture Compare Preload Control bit. More...

Detailed Description

Advanced-control timers (TIM1 and TIM8) specific features.

 ===============================================================================
          Advanced-control timers (TIM1 and TIM8) specific features
 ===============================================================================  
  
       ===================================================================      
              TIM Driver: how to use the Break feature
       =================================================================== 
       After configuring the Timer channel(s) in the appropriate Output Compare mode: 
                         
       1. Fill the TIM_BDTRInitStruct with the desired parameters for the Timer
          Break Polarity, dead time, Lock level, the OSSI/OSSR State and the 
          AOE(automatic output enable).
               
       2. Call TIM_BDTRConfig(TIMx, &TIM_BDTRInitStruct) to configure the Timer
          
       3. Enable the Main Output using TIM_CtrlPWMOutputs(TIM1, ENABLE) 
          
       4. Once the break even occurs, the Timer's output signals are put in reset
          state or in a known state (according to the configuration made in
          TIM_BDTRConfig() function).

Function Documentation

void TIM_BDTRConfig	(	TIM_TypeDef *	TIMx,
		TIM_BDTRInitTypeDef *	TIM_BDTRInitStruct
	)

Configures the Break feature, dead time, Lock level, OSSI/OSSR State and the AOE(automatic output enable).

Parameters

TIMx,:	where x can be 1 or 8 to select the TIM
TIM_BDTRInitStruct,:	pointer to a TIM_BDTRInitTypeDef structure that contains the BDTR Register configuration information for the TIM peripheral.

Return values

None

void TIM_BDTRStructInit

(

TIM_BDTRInitTypeDef *

TIM_BDTRInitStruct

)

Fills each TIM_BDTRInitStruct member with its default value.

Parameters

TIM_BDTRInitStruct,:

pointer to a TIM_BDTRInitTypeDef structure which will be initialized.

Return values

None

void TIM_CCPreloadControl	(	TIM_TypeDef *	TIMx,
		FunctionalState	NewState
	)

Sets or Resets the TIM peripheral Capture Compare Preload Control bit.

Parameters

TIMx,:	where x can be 1 or 8 to select the TIMx peripheral
NewState,:	new state of the Capture Compare Preload Control bit This parameter can be: ENABLE or DISABLE.

Return values

None

void TIM_CtrlPWMOutputs	(	TIM_TypeDef *	TIMx,
		FunctionalState	NewState
	)

Enables or disables the TIM peripheral Main Outputs.

Parameters

TIMx,:	where x can be 1 or 8 to select the TIMx peripheral.
NewState,:	new state of the TIM peripheral Main Outputs. This parameter can be: ENABLE or DISABLE.

Return values

None

void TIM_SelectCOM	(	TIM_TypeDef *	TIMx,
		FunctionalState	NewState
	)

Selects the TIM peripheral Commutation event.

Parameters

TIMx,:	where x can be 1 or 8 to select the TIMx peripheral
NewState,:	new state of the Commutation event. This parameter can be: ENABLE or DISABLE.

Return values

None