Tampers configuration functions

Tampers configuration functions. More...

Functions
void	RTC_TamperTriggerConfig (uint32_t RTC_Tamper, uint32_t RTC_TamperTrigger)
	Configures the select Tamper pin edge. More...
void	RTC_TamperCmd (uint32_t RTC_Tamper, FunctionalState NewState)
	Enables or Disables the Tamper detection. More...
void	RTC_TamperFilterConfig (uint32_t RTC_TamperFilter)
	Configures the Tampers Filter. More...
void	RTC_TamperSamplingFreqConfig (uint32_t RTC_TamperSamplingFreq)
	Configures the Tampers Sampling Frequency. More...
void	RTC_TamperPinsPrechargeDuration (uint32_t RTC_TamperPrechargeDuration)
	Configures the Tampers Pins input Precharge Duration. More...
void	RTC_TimeStampOnTamperDetectionCmd (FunctionalState NewState)
	Enables or Disables the TimeStamp on Tamper Detection Event. More...
void	RTC_TamperPullUpCmd (FunctionalState NewState)
	Enables or Disables the Precharge of Tamper pin. More...

Detailed Description

Tampers configuration functions.

 ===============================================================================
                       Tampers configuration functions
 ===============================================================================  

Function Documentation

void RTC_TamperCmd	(	uint32_t	RTC_Tamper,
		FunctionalState	NewState
	)

Enables or Disables the Tamper detection.

Parameters

RTC_Tamper,:	Selected tamper pin. This parameter can be RTC_Tamper_1.
NewState,:	new state of the tamper pin. This parameter can be: ENABLE or DISABLE.

Return values

None

void RTC_TamperFilterConfig

(

uint32_t

RTC_TamperFilter

)

Configures the Tampers Filter.

Parameters

RTC_TamperFilter,:

Specifies the tampers filter. This parameter can be one of the following values: RTC_TamperFilter_Disable: Tamper filter is disabled. RTC_TamperFilter_2Sample: Tamper is activated after 2 consecutive samples at the active level RTC_TamperFilter_4Sample: Tamper is activated after 4 consecutive samples at the active level RTC_TamperFilter_8Sample: Tamper is activated after 8 consecutive samples at the active level

Return values

None

void RTC_TamperPinsPrechargeDuration

(

uint32_t

RTC_TamperPrechargeDuration

)

Configures the Tampers Pins input Precharge Duration.

Parameters

RTC_TamperPrechargeDuration,:

Specifies the Tampers Pins input Precharge Duration. This parameter can be one of the following values: RTC_TamperPrechargeDuration_1RTCCLK: Tamper pins are pre-charged before sampling during 1 RTCCLK cycle RTC_TamperPrechargeDuration_2RTCCLK: Tamper pins are pre-charged before sampling during 2 RTCCLK cycle RTC_TamperPrechargeDuration_4RTCCLK: Tamper pins are pre-charged before sampling during 4 RTCCLK cycle RTC_TamperPrechargeDuration_8RTCCLK: Tamper pins are pre-charged before sampling during 8 RTCCLK cycle

Return values

None

void RTC_TamperPullUpCmd

(

FunctionalState

NewState

)

Enables or Disables the Precharge of Tamper pin.

Parameters

NewState,:

new state of tamper pull up. This parameter can be: ENABLE or DISABLE.

Return values

None

void RTC_TamperSamplingFreqConfig

(

uint32_t

RTC_TamperSamplingFreq

)

Configures the Tampers Sampling Frequency.

Parameters

RTC_TamperSamplingFreq,:

Specifies the tampers Sampling Frequency. This parameter can be one of the following values: RTC_TamperSamplingFreq_RTCCLK_Div32768: Each of the tamper inputs are sampled with a frequency = RTCCLK / 32768 RTC_TamperSamplingFreq_RTCCLK_Div16384: Each of the tamper inputs are sampled with a frequency = RTCCLK / 16384 RTC_TamperSamplingFreq_RTCCLK_Div8192: Each of the tamper inputs are sampled with a frequency = RTCCLK / 8192 RTC_TamperSamplingFreq_RTCCLK_Div4096: Each of the tamper inputs are sampled with a frequency = RTCCLK / 4096 RTC_TamperSamplingFreq_RTCCLK_Div2048: Each of the tamper inputs are sampled with a frequency = RTCCLK / 2048 RTC_TamperSamplingFreq_RTCCLK_Div1024: Each of the tamper inputs are sampled with a frequency = RTCCLK / 1024 RTC_TamperSamplingFreq_RTCCLK_Div512: Each of the tamper inputs are sampled with a frequency = RTCCLK / 512 RTC_TamperSamplingFreq_RTCCLK_Div256: Each of the tamper inputs are sampled with a frequency = RTCCLK / 256

Return values

None

void RTC_TamperTriggerConfig	(	uint32_t	RTC_Tamper,
		uint32_t	RTC_TamperTrigger
	)

Configures the select Tamper pin edge.

Parameters

RTC_Tamper,:

Selected tamper pin. This parameter can be RTC_Tamper_1.

RTC_TamperTrigger,:

Specifies the trigger on the tamper pin that stimulates tamper event. This parameter can be one of the following values: RTC_TamperTrigger_RisingEdge: Rising Edge of the tamper pin causes tamper event. RTC_TamperTrigger_FallingEdge: Falling Edge of the tamper pin causes tamper event. RTC_TamperTrigger_LowLevel: Low Level of the tamper pin causes tamper event. RTC_TamperTrigger_HighLevel: High Level of the tamper pin causes tamper event.

Return values

None

void RTC_TimeStampOnTamperDetectionCmd

(

FunctionalState

NewState

)

Enables or Disables the TimeStamp on Tamper Detection Event.

Note

The timestamp is valid even the TSE bit in tamper control register is reset.

Parameters

NewState,:

new state of the timestamp on tamper event. This parameter can be: ENABLE or DISABLE.

Return values

None