NAND Controller functions. More...

Functions
void	FSMC_NANDDeInit (uint32_t FSMC_Bank)
	Deinitializes the FSMC NAND Banks registers to their default reset values. More...

void	FSMC_NANDInit (FSMC_NANDInitTypeDef *FSMC_NANDInitStruct)
	Initializes the FSMC NAND Banks according to the specified parameters in the FSMC_NANDInitStruct. More...

void	FSMC_NANDStructInit (FSMC_NANDInitTypeDef *FSMC_NANDInitStruct)
	Fills each FSMC_NANDInitStruct member with its default value. More...

void	FSMC_NANDCmd (uint32_t FSMC_Bank, FunctionalState NewState)
	Enables or disables the specified NAND Memory Bank. More...

void	FSMC_NANDECCCmd (uint32_t FSMC_Bank, FunctionalState NewState)
	Enables or disables the FSMC NAND ECC feature. More...

uint32_t	FSMC_GetECC (uint32_t FSMC_Bank)
	Returns the error correction code register value. More...

Detailed Description

NAND Controller functions.

 ===============================================================================
                    NAND Controller functions
 ===============================================================================  

 The following sequence should be followed to configure the FSMC to interface with
 8-bit or 16-bit NAND memory connected to the NAND Bank:
 
   1. Enable the clock for the FSMC and associated GPIOs using the following functions:
          RCC_AHB3PeriphClockCmd(RCC_AHB3Periph_FSMC, ENABLE);
          RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOx, ENABLE);

   2. FSMC pins configuration 
       - Connect the involved FSMC pins to AF12 using the following function 
          GPIO_PinAFConfig(GPIOx, GPIO_PinSourcex, GPIO_AF_FSMC); 
       - Configure these FSMC pins in alternate function mode by calling the function
          GPIO_Init();    
       
   3. Declare a FSMC_NANDInitTypeDef structure, for example:
          FSMC_NANDInitTypeDef  FSMC_NANDInitStructure;
      and fill the FSMC_NANDInitStructure variable with the allowed values of
      the structure member.
      
   4. Initialize the NAND Controller by calling the function
          FSMC_NANDInit(&FSMC_NANDInitStructure); 

   5. Then enable the NAND Bank, for example:
          FSMC_NANDCmd(FSMC_Bank3_NAND, ENABLE);  

   6. At this stage you can read/write from/to the memory connected to the NAND Bank. 
   
@note To enable the Error Correction Code (ECC), you have to use the function
          FSMC_NANDECCCmd(FSMC_Bank3_NAND, ENABLE);  
      and to get the current ECC value you have to use the function
          ECCval = FSMC_GetECC(FSMC_Bank3_NAND);

Function Documentation

uint32_t FSMC_GetECC ( uint32_t FSMC_Bank )

Returns the error correction code register value.

Parameters

FSMC_Bank,:

specifies the FSMC Bank to be used This parameter can be one of the following values:

FSMC_Bank2_NAND: FSMC Bank2 NAND
FSMC_Bank3_NAND: FSMC Bank3 NAND

Return values

The	Error Correction Code (ECC) value.

void FSMC_NANDCmd	(	uint32_t	FSMC_Bank,
		FunctionalState	NewState
	)

Enables or disables the specified NAND Memory Bank.

Parameters

FSMC_Bank,:	specifies the FSMC Bank to be used This parameter can be one of the following values: FSMC_Bank2_NAND: FSMC Bank2 NAND FSMC_Bank3_NAND: FSMC Bank3 NAND
NewState,:	new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE.

Return values

None

void FSMC_NANDDeInit ( uint32_t FSMC_Bank )

Deinitializes the FSMC NAND Banks registers to their default reset values.

Parameters

FSMC_Bank,:

specifies the FSMC Bank to be used This parameter can be one of the following values:

FSMC_Bank2_NAND: FSMC Bank2 NAND
FSMC_Bank3_NAND: FSMC Bank3 NAND

Return values

None

void FSMC_NANDECCCmd	(	uint32_t	FSMC_Bank,
		FunctionalState	NewState
	)

Enables or disables the FSMC NAND ECC feature.

Parameters

FSMC_Bank,:	specifies the FSMC Bank to be used This parameter can be one of the following values: FSMC_Bank2_NAND: FSMC Bank2 NAND FSMC_Bank3_NAND: FSMC Bank3 NAND
NewState,:	new state of the FSMC NAND ECC feature. This parameter can be: ENABLE or DISABLE.

Return values

None

void FSMC_NANDInit ( FSMC_NANDInitTypeDef * FSMC_NANDInitStruct )

Initializes the FSMC NAND Banks according to the specified parameters in the FSMC_NANDInitStruct.

Parameters

FSMC_NANDInitStruct : pointer to a FSMC_NANDInitTypeDef structure that contains the configuration information for the FSMC NAND specified Banks.

Return values

None

void FSMC_NANDStructInit ( FSMC_NANDInitTypeDef * FSMC_NANDInitStruct )

Fills each FSMC_NANDInitStruct member with its default value.

Parameters

FSMC_NANDInitStruct,: pointer to a FSMC_NANDInitTypeDef structure which will be initialized.

Return values

None

Functions

Detailed Description

Function Documentation