STM32F37 Standard Peripheral bibliotheek  1.0
ST Microelectronics bibliotheek documentatie voor de STM32F37 Standard Peripheral Library
 All Data Structures Files Functions Variables Enumerations Enumerator Groups
TimeBase management functions

TimeBase management functions. More...

Functions

void TIM_DeInit (TIM_TypeDef *TIMx)
 Deinitializes the TIMx peripheral registers to their default reset values. More...
 
void TIM_TimeBaseInit (TIM_TypeDef *TIMx, TIM_TimeBaseInitTypeDef *TIM_TimeBaseInitStruct)
 Initializes the TIMx Time Base Unit peripheral according to the specified parameters in the TIM_TimeBaseInitStruct. More...
 
void TIM_TimeBaseStructInit (TIM_TimeBaseInitTypeDef *TIM_TimeBaseInitStruct)
 Fills each TIM_TimeBaseInitStruct member with its default value. More...
 
void TIM_PrescalerConfig (TIM_TypeDef *TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode)
 Configures the TIMx Prescaler. More...
 
void TIM_CounterModeConfig (TIM_TypeDef *TIMx, uint16_t TIM_CounterMode)
 Specifies the TIMx Counter Mode to be used. More...
 
void TIM_SetCounter (TIM_TypeDef *TIMx, uint32_t Counter)
 Sets the TIMx Counter Register value. More...
 
void TIM_SetAutoreload (TIM_TypeDef *TIMx, uint32_t Autoreload)
 Sets the TIMx Autoreload Register value. More...
 
uint32_t TIM_GetCounter (TIM_TypeDef *TIMx)
 Gets the TIMx Counter value. More...
 
uint16_t TIM_GetPrescaler (TIM_TypeDef *TIMx)
 Gets the TIMx Prescaler value. More...
 
void TIM_UpdateDisableConfig (TIM_TypeDef *TIMx, FunctionalState NewState)
 Enables or Disables the TIMx Update event. More...
 
void TIM_UpdateRequestConfig (TIM_TypeDef *TIMx, uint16_t TIM_UpdateSource)
 Configures the TIMx Update Request Interrupt source. More...
 
void TIM_ARRPreloadConfig (TIM_TypeDef *TIMx, FunctionalState NewState)
 Enables or disables TIMx peripheral Preload register on ARR. More...
 
void TIM_SelectOnePulseMode (TIM_TypeDef *TIMx, uint16_t TIM_OPMode)
 Selects the TIMx's One Pulse Mode. More...
 
void TIM_SetClockDivision (TIM_TypeDef *TIMx, uint16_t TIM_CKD)
 Sets the TIMx Clock Division value. More...
 
void TIM_Cmd (TIM_TypeDef *TIMx, FunctionalState NewState)
 Enables or disables the specified TIM peripheral. More...
 

Detailed Description

TimeBase management functions.

 ===============================================================================
                 ##### TimeBase management functions #####
 ===============================================================================
  
        *** TIM Driver: how to use it in Timing(Time base) Mode ***
 ===============================================================================
    [..] To use the Timer in Timing(Time base) mode, the following steps are 
         mandatory:
         (#) Enable TIM clock using 
             RCC_APBxPeriphClockCmd(RCC_APBxPeriph_TIMx, ENABLE) function.
         (#) Fill the TIM_TimeBaseInitStruct with the desired parameters.
         (#) Call TIM_TimeBaseInit(TIMx, &TIM_TimeBaseInitStruct) to configure 
             the Time Base unit with the corresponding configuration.
         (#) Enable the NVIC if you need to generate the update interrupt. 
         (#) Enable the corresponding interrupt using the function 
             TIM_ITConfig(TIMx, TIM_IT_Update). 
         (#) Call the TIM_Cmd(ENABLE) function to enable the TIM counter.
    [..]
        (@) All other functions can be used seperatly to modify, if needed,
            a specific feature of the Timer. 

Function Documentation

void TIM_ARRPreloadConfig ( TIM_TypeDef *  TIMx,
FunctionalState  NewState 
)

Enables or disables TIMx peripheral Preload register on ARR.

Parameters
TIMx,:where x can be 2, 3, 4, 5, 6, 7, 12, 13, 14, 15, 16, 17, 18 and 19 to select the TIM peripheral.
NewState,:new state of the TIMx peripheral Preload register This parameter can be: ENABLE or DISABLE.
Return values
None
void TIM_Cmd ( TIM_TypeDef *  TIMx,
FunctionalState  NewState 
)

Enables or disables the specified TIM peripheral.

Parameters
TIMx,:where x can be 2, 3, 4, 5, 6, 7, 12, 13, 14, 15, 16, 17, 18 and 19 to select the TIMx peripheral.
NewState,:new state of the TIMx peripheral. This parameter can be: ENABLE or DISABLE.
Return values
None
void TIM_CounterModeConfig ( TIM_TypeDef *  TIMx,
uint16_t  TIM_CounterMode 
)

Specifies the TIMx Counter Mode to be used.

Parameters
TIMx,:where x can be 2, 3, 4, 5, or 19 to select the TIM peripheral.
TIM_CounterMode,:specifies the Counter Mode to be used This parameter can be one of the following values:
  • TIM_CounterMode_Up: TIM Up Counting Mode
  • TIM_CounterMode_Down: TIM Down Counting Mode
  • TIM_CounterMode_CenterAligned1: TIM Center Aligned Mode1
  • TIM_CounterMode_CenterAligned2: TIM Center Aligned Mode2
  • TIM_CounterMode_CenterAligned3: TIM Center Aligned Mode3
Return values
None
void TIM_DeInit ( TIM_TypeDef *  TIMx)

Deinitializes the TIMx peripheral registers to their default reset values.

Parameters
TIMx,:where x can be 2, 3, 4, 5, 6, 7, 12, 13, 14, 15, 16, 17, 18 and 19 to select the TIM peripheral.
Return values
None
uint32_t TIM_GetCounter ( TIM_TypeDef *  TIMx)

Gets the TIMx Counter value.

Parameters
TIMx,:where x can be 2, 3, 4, 5, 6, 7, 12, 13, 14, 15, 16, 17, 18 and 19 to select the TIM peripheral.
Return values
CounterRegister value.
uint16_t TIM_GetPrescaler ( TIM_TypeDef *  TIMx)

Gets the TIMx Prescaler value.

Parameters
TIMx,:where x can be 2, 3, 4, 5, 6, 7, 12, 13, 14, 15, 16, 17, 18 and 19 to select the TIM peripheral.
Return values
PrescalerRegister value.
void TIM_PrescalerConfig ( TIM_TypeDef *  TIMx,
uint16_t  Prescaler,
uint16_t  TIM_PSCReloadMode 
)

Configures the TIMx Prescaler.

Parameters
TIMx,:where x can be 2, 3, 4, 5, 6, 7, 12, 13, 14, 15, 16, 17, 18 and 19 to select the TIM peripheral.
Prescaler,:specifies the Prescaler Register value
TIM_PSCReloadMode,:specifies the TIM Prescaler Reload mode This parameter can be one of the following values:
  • TIM_PSCReloadMode_Update: The Prescaler is loaded at the update event.
  • TIM_PSCReloadMode_Immediate: The Prescaler is loaded immediatly.
Return values
None
void TIM_SelectOnePulseMode ( TIM_TypeDef *  TIMx,
uint16_t  TIM_OPMode 
)

Selects the TIMx's One Pulse Mode.

Parameters
TIMx,:where x can be 2, 3, 4, 5, 6, 7, 12, 13, 14, 15, 16, 17, 18 and 19 to select the TIM peripheral.
TIM_OPMode,:specifies the OPM Mode to be used. This parameter can be one of the following values:
  • TIM_OPMode_Single
  • TIM_OPMode_Repetitive
Return values
None
void TIM_SetAutoreload ( TIM_TypeDef *  TIMx,
uint32_t  Autoreload 
)

Sets the TIMx Autoreload Register value.

Parameters
TIMx,:where x can be 2, 3, 4, 5, 6, 7, 12, 13, 14, 15, 16, 17, 18 and 19 to select the TIM peripheral.
Autoreload,:specifies the Autoreload register new value.
Return values
None
void TIM_SetClockDivision ( TIM_TypeDef *  TIMx,
uint16_t  TIM_CKD 
)

Sets the TIMx Clock Division value.

Parameters
TIMx,:where x can be 2, 3, 4, 5, 12, 13, 14, 15, 16, 17 and 19 to select the TIM peripheral.
TIM_CKD,:specifies the clock division value. This parameter can be one of the following value:
  • TIM_CKD_DIV1: TDTS = Tck_tim
  • TIM_CKD_DIV2: TDTS = 2*Tck_tim
  • TIM_CKD_DIV4: TDTS = 4*Tck_tim
Return values
None
void TIM_SetCounter ( TIM_TypeDef *  TIMx,
uint32_t  Counter 
)

Sets the TIMx Counter Register value.

Parameters
TIMx,:where x can be 2, 3, 4, 5, 6, 7, 12, 13, 14, 15, 16, 17, 18 and 19 to select the TIM peripheral.
Counter,:specifies the Counter register new value.
Return values
None
void TIM_TimeBaseInit ( TIM_TypeDef *  TIMx,
TIM_TimeBaseInitTypeDef TIM_TimeBaseInitStruct 
)

Initializes the TIMx Time Base Unit peripheral according to the specified parameters in the TIM_TimeBaseInitStruct.

Parameters
TIMx,:where x can be 2, 3, 4, 5, 6, 7, 12, 13, 14, 15, 16, 17, 18 and 19 to select the TIM peripheral.
TIM_TimeBaseInitStruct,:pointer to a TIM_TimeBaseInitTypeDef structure that contains the configuration information for the specified TIM peripheral.
Return values
None
void TIM_TimeBaseStructInit ( TIM_TimeBaseInitTypeDef TIM_TimeBaseInitStruct)

Fills each TIM_TimeBaseInitStruct member with its default value.

Parameters
TIM_TimeBaseInitStruct,:pointer to a TIM_TimeBaseInitTypeDef structure which will be initialized.
Return values
None
void TIM_UpdateDisableConfig ( TIM_TypeDef *  TIMx,
FunctionalState  NewState 
)

Enables or Disables the TIMx Update event.

Parameters
TIMx,:where x can be 2, 3, 4, 5, 6, 7, 12, 13, 14, 15, 16, 17, 18 and 19 to select the TIM peripheral.
NewState,:new state of the TIMx UDIS bit This parameter can be: ENABLE or DISABLE.
Return values
None
void TIM_UpdateRequestConfig ( TIM_TypeDef *  TIMx,
uint16_t  TIM_UpdateSource 
)

Configures the TIMx Update Request Interrupt source.

Parameters
TIMx,:where x can be 2, 3, 4, 5, 6, 7, 12, 13, 14, 15, 16, 17, 18 and 19 to select the TIM peripheral.
TIM_UpdateSource,:specifies the Update source. This parameter can be one of the following values:
  • TIM_UpdateSource_Regular: Source of update is the counter overflow/underflow or the setting of UG bit, or an update generation through the slave mode controller.
  • TIM_UpdateSource_Global: Source of update is counter overflow/underflow.
Return values
None