STM32F2 Standard Peripheral bibliotheek  1.0
ST Microelectronics bibliotheek documentatie voor de STM32F2 Standard Peripheral Library
 All Data Structures Files Functions Variables Enumerations Enumerator Groups
stm32f2xx_usart.h File Reference

This file contains all the functions prototypes for the USART firmware library. More...

#include "stm32f2xx.h"

Go to the source code of this file.

Data Structures

struct  USART_InitTypeDef
 USART Init Structure definition. More...
 
struct  USART_ClockInitTypeDef
 USART Clock Init Structure definition. More...
 

Macros

#define IS_USART_ALL_PERIPH(PERIPH)
 
#define IS_USART_1236_PERIPH(PERIPH)
 
#define USART_WordLength_8b   ((uint16_t)0x0000)
 
#define USART_WordLength_9b   ((uint16_t)0x1000)
 
#define IS_USART_WORD_LENGTH(LENGTH)
 
#define USART_StopBits_1   ((uint16_t)0x0000)
 
#define USART_StopBits_0_5   ((uint16_t)0x1000)
 
#define USART_StopBits_2   ((uint16_t)0x2000)
 
#define USART_StopBits_1_5   ((uint16_t)0x3000)
 
#define IS_USART_STOPBITS(STOPBITS)
 
#define USART_Parity_No   ((uint16_t)0x0000)
 
#define USART_Parity_Even   ((uint16_t)0x0400)
 
#define USART_Parity_Odd   ((uint16_t)0x0600)
 
#define IS_USART_PARITY(PARITY)
 
#define USART_Mode_Rx   ((uint16_t)0x0004)
 
#define USART_Mode_Tx   ((uint16_t)0x0008)
 
#define IS_USART_MODE(MODE)   ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00))
 
#define USART_HardwareFlowControl_None   ((uint16_t)0x0000)
 
#define USART_HardwareFlowControl_RTS   ((uint16_t)0x0100)
 
#define USART_HardwareFlowControl_CTS   ((uint16_t)0x0200)
 
#define USART_HardwareFlowControl_RTS_CTS   ((uint16_t)0x0300)
 
#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)
 
#define USART_Clock_Disable   ((uint16_t)0x0000)
 
#define USART_Clock_Enable   ((uint16_t)0x0800)
 
#define IS_USART_CLOCK(CLOCK)
 
#define USART_CPOL_Low   ((uint16_t)0x0000)
 
#define USART_CPOL_High   ((uint16_t)0x0400)
 
#define IS_USART_CPOL(CPOL)   (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High))
 
#define USART_CPHA_1Edge   ((uint16_t)0x0000)
 
#define USART_CPHA_2Edge   ((uint16_t)0x0200)
 
#define IS_USART_CPHA(CPHA)   (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge))
 
#define USART_LastBit_Disable   ((uint16_t)0x0000)
 
#define USART_LastBit_Enable   ((uint16_t)0x0100)
 
#define IS_USART_LASTBIT(LASTBIT)
 
#define USART_IT_PE   ((uint16_t)0x0028)
 
#define USART_IT_TXE   ((uint16_t)0x0727)
 
#define USART_IT_TC   ((uint16_t)0x0626)
 
#define USART_IT_RXNE   ((uint16_t)0x0525)
 
#define USART_IT_ORE_RX   ((uint16_t)0x0325) /* In case interrupt is generated if the RXNEIE bit is set */
 
#define USART_IT_IDLE   ((uint16_t)0x0424)
 
#define USART_IT_LBD   ((uint16_t)0x0846)
 
#define USART_IT_CTS   ((uint16_t)0x096A)
 
#define USART_IT_ERR   ((uint16_t)0x0060)
 
#define USART_IT_ORE_ER   ((uint16_t)0x0360) /* In case interrupt is generated if the EIE bit is set */
 
#define USART_IT_NE   ((uint16_t)0x0260)
 
#define USART_IT_FE   ((uint16_t)0x0160)
 
#define USART_IT_ORE   USART_IT_ORE_ER
 
#define IS_USART_CONFIG_IT(IT)
 
#define IS_USART_GET_IT(IT)
 
#define IS_USART_CLEAR_IT(IT)
 
#define USART_DMAReq_Tx   ((uint16_t)0x0080)
 
#define USART_DMAReq_Rx   ((uint16_t)0x0040)
 
#define IS_USART_DMAREQ(DMAREQ)   ((((DMAREQ) & (uint16_t)0xFF3F) == 0x00) && ((DMAREQ) != (uint16_t)0x00))
 
#define USART_WakeUp_IdleLine   ((uint16_t)0x0000)
 
#define USART_WakeUp_AddressMark   ((uint16_t)0x0800)
 
#define IS_USART_WAKEUP(WAKEUP)
 
#define USART_LINBreakDetectLength_10b   ((uint16_t)0x0000)
 
#define USART_LINBreakDetectLength_11b   ((uint16_t)0x0020)
 
#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH)
 
#define USART_IrDAMode_LowPower   ((uint16_t)0x0004)
 
#define USART_IrDAMode_Normal   ((uint16_t)0x0000)
 
#define IS_USART_IRDA_MODE(MODE)
 
#define USART_FLAG_CTS   ((uint16_t)0x0200)
 
#define USART_FLAG_LBD   ((uint16_t)0x0100)
 
#define USART_FLAG_TXE   ((uint16_t)0x0080)
 
#define USART_FLAG_TC   ((uint16_t)0x0040)
 
#define USART_FLAG_RXNE   ((uint16_t)0x0020)
 
#define USART_FLAG_IDLE   ((uint16_t)0x0010)
 
#define USART_FLAG_ORE   ((uint16_t)0x0008)
 
#define USART_FLAG_NE   ((uint16_t)0x0004)
 
#define USART_FLAG_FE   ((uint16_t)0x0002)
 
#define USART_FLAG_PE   ((uint16_t)0x0001)
 
#define IS_USART_FLAG(FLAG)
 
#define IS_USART_CLEAR_FLAG(FLAG)   ((((FLAG) & (uint16_t)0xFC9F) == 0x00) && ((FLAG) != (uint16_t)0x00))
 
#define IS_USART_BAUDRATE(BAUDRATE)   (((BAUDRATE) > 0) && ((BAUDRATE) < 7500001))
 
#define IS_USART_ADDRESS(ADDRESS)   ((ADDRESS) <= 0xF)
 
#define IS_USART_DATA(DATA)   ((DATA) <= 0x1FF)
 

Functions

void USART_DeInit (USART_TypeDef *USARTx)
 Deinitializes the USARTx peripheral registers to their default reset values. More...
 
void USART_Init (USART_TypeDef *USARTx, USART_InitTypeDef *USART_InitStruct)
 Initializes the USARTx peripheral according to the specified parameters in the USART_InitStruct . More...
 
void USART_StructInit (USART_InitTypeDef *USART_InitStruct)
 Fills each USART_InitStruct member with its default value. More...
 
void USART_ClockInit (USART_TypeDef *USARTx, USART_ClockInitTypeDef *USART_ClockInitStruct)
 Initializes the USARTx peripheral Clock according to the specified parameters in the USART_ClockInitStruct . More...
 
void USART_ClockStructInit (USART_ClockInitTypeDef *USART_ClockInitStruct)
 Fills each USART_ClockInitStruct member with its default value. More...
 
void USART_Cmd (USART_TypeDef *USARTx, FunctionalState NewState)
 Enables or disables the specified USART peripheral. More...
 
void USART_SetPrescaler (USART_TypeDef *USARTx, uint8_t USART_Prescaler)
 Sets the system clock prescaler. More...
 
void USART_OverSampling8Cmd (USART_TypeDef *USARTx, FunctionalState NewState)
 Enables or disables the USART's 8x oversampling mode. More...
 
void USART_OneBitMethodCmd (USART_TypeDef *USARTx, FunctionalState NewState)
 Enables or disables the USART's one bit sampling method. More...
 
void USART_SendData (USART_TypeDef *USARTx, uint16_t Data)
 Transmits single data through the USARTx peripheral. More...
 
uint16_t USART_ReceiveData (USART_TypeDef *USARTx)
 Returns the most recent received data by the USARTx peripheral. More...
 
void USART_SetAddress (USART_TypeDef *USARTx, uint8_t USART_Address)
 Sets the address of the USART node. More...
 
void USART_WakeUpConfig (USART_TypeDef *USARTx, uint16_t USART_WakeUp)
 Selects the USART WakeUp method. More...
 
void USART_ReceiverWakeUpCmd (USART_TypeDef *USARTx, FunctionalState NewState)
 Determines if the USART is in mute mode or not. More...
 
void USART_LINBreakDetectLengthConfig (USART_TypeDef *USARTx, uint16_t USART_LINBreakDetectLength)
 Sets the USART LIN Break detection length. More...
 
void USART_LINCmd (USART_TypeDef *USARTx, FunctionalState NewState)
 Enables or disables the USART's LIN mode. More...
 
void USART_SendBreak (USART_TypeDef *USARTx)
 Transmits break characters. More...
 
void USART_HalfDuplexCmd (USART_TypeDef *USARTx, FunctionalState NewState)
 Enables or disables the USART's Half Duplex communication. More...
 
void USART_SmartCardCmd (USART_TypeDef *USARTx, FunctionalState NewState)
 Enables or disables the USART's Smart Card mode. More...
 
void USART_SmartCardNACKCmd (USART_TypeDef *USARTx, FunctionalState NewState)
 Enables or disables NACK transmission. More...
 
void USART_SetGuardTime (USART_TypeDef *USARTx, uint8_t USART_GuardTime)
 Sets the specified USART guard time. More...
 
void USART_IrDAConfig (USART_TypeDef *USARTx, uint16_t USART_IrDAMode)
 Configures the USART's IrDA interface. More...
 
void USART_IrDACmd (USART_TypeDef *USARTx, FunctionalState NewState)
 Enables or disables the USART's IrDA interface. More...
 
void USART_DMACmd (USART_TypeDef *USARTx, uint16_t USART_DMAReq, FunctionalState NewState)
 Enables or disables the USART's DMA interface. More...
 
void USART_ITConfig (USART_TypeDef *USARTx, uint16_t USART_IT, FunctionalState NewState)
 Enables or disables the specified USART interrupts. More...
 
FlagStatus USART_GetFlagStatus (USART_TypeDef *USARTx, uint16_t USART_FLAG)
 Checks whether the specified USART flag is set or not. More...
 
void USART_ClearFlag (USART_TypeDef *USARTx, uint16_t USART_FLAG)
 Clears the USARTx's pending flags. More...
 
ITStatus USART_GetITStatus (USART_TypeDef *USARTx, uint16_t USART_IT)
 Checks whether the specified USART interrupt has occurred or not. More...
 
void USART_ClearITPendingBit (USART_TypeDef *USARTx, uint16_t USART_IT)
 Clears the USARTx's interrupt pending bits. More...
 

Detailed Description

This file contains all the functions prototypes for the USART firmware library.

Author
MCD Application Team
Version
V1.1.2
Date
05-March-2012
Attention

© COPYRIGHT 2012 STMicroelectronics

Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); You may not use this file except in compliance with the License. You may obtain a copy of the License at:

   http://www.st.com/software_license_agreement_liberty_v2

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.