STM32F2 Standard Peripheral bibliotheek  1.0
ST Microelectronics bibliotheek documentatie voor de STM32F2 Standard Peripheral Library
 All Data Structures Files Functions Variables Enumerations Enumerator Groups
Interrupts and flags management functions

Interrupts and flags management functions. More...

Functions

void RCC_ITConfig (uint8_t RCC_IT, FunctionalState NewState)
 Enables or disables the specified RCC interrupts. More...
 
FlagStatus RCC_GetFlagStatus (uint8_t RCC_FLAG)
 Checks whether the specified RCC flag is set or not. More...
 
void RCC_ClearFlag (void)
 Clears the RCC reset flags. The reset flags are: RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST. More...
 
ITStatus RCC_GetITStatus (uint8_t RCC_IT)
 Checks whether the specified RCC interrupt has occurred or not. More...
 
void RCC_ClearITPendingBit (uint8_t RCC_IT)
 Clears the RCC's interrupt pending bits. More...
 

Detailed Description

Interrupts and flags management functions.

 ===============================================================================
                   Interrupts and flags management functions
 ===============================================================================  

Function Documentation

void RCC_ClearFlag ( void  )

Clears the RCC reset flags. The reset flags are: RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST.

Parameters
None
Return values
None
void RCC_ClearITPendingBit ( uint8_t  RCC_IT)

Clears the RCC's interrupt pending bits.

Parameters
RCC_IT,:specifies the interrupt pending bit to clear. This parameter can be any combination of the following values:
  • RCC_IT_LSIRDY: LSI ready interrupt
  • RCC_IT_LSERDY: LSE ready interrupt
  • RCC_IT_HSIRDY: HSI ready interrupt
  • RCC_IT_HSERDY: HSE ready interrupt
  • RCC_IT_PLLRDY: main PLL ready interrupt
  • RCC_IT_PLLI2SRDY: PLLI2S ready interrupt
  • RCC_IT_CSS: Clock Security System interrupt
Return values
None
FlagStatus RCC_GetFlagStatus ( uint8_t  RCC_FLAG)

Checks whether the specified RCC flag is set or not.

Parameters
RCC_FLAG,:specifies the flag to check. This parameter can be one of the following values:
  • RCC_FLAG_HSIRDY: HSI oscillator clock ready
  • RCC_FLAG_HSERDY: HSE oscillator clock ready
  • RCC_FLAG_PLLRDY: main PLL clock ready
  • RCC_FLAG_PLLI2SRDY: PLLI2S clock ready
  • RCC_FLAG_LSERDY: LSE oscillator clock ready
  • RCC_FLAG_LSIRDY: LSI oscillator clock ready
  • RCC_FLAG_BORRST: POR/PDR or BOR reset
  • RCC_FLAG_PINRST: Pin reset
  • RCC_FLAG_PORRST: POR/PDR reset
  • RCC_FLAG_SFTRST: Software reset
  • RCC_FLAG_IWDGRST: Independent Watchdog reset
  • RCC_FLAG_WWDGRST: Window Watchdog reset
  • RCC_FLAG_LPWRRST: Low Power reset
Return values
Thenew state of RCC_FLAG (SET or RESET).
ITStatus RCC_GetITStatus ( uint8_t  RCC_IT)

Checks whether the specified RCC interrupt has occurred or not.

Parameters
RCC_IT,:specifies the RCC interrupt source to check. This parameter can be one of the following values:
  • RCC_IT_LSIRDY: LSI ready interrupt
  • RCC_IT_LSERDY: LSE ready interrupt
  • RCC_IT_HSIRDY: HSI ready interrupt
  • RCC_IT_HSERDY: HSE ready interrupt
  • RCC_IT_PLLRDY: main PLL ready interrupt
  • RCC_IT_PLLI2SRDY: PLLI2S ready interrupt
  • RCC_IT_CSS: Clock Security System interrupt
Return values
Thenew state of RCC_IT (SET or RESET).
void RCC_ITConfig ( uint8_t  RCC_IT,
FunctionalState  NewState 
)

Enables or disables the specified RCC interrupts.

Parameters
RCC_IT,:specifies the RCC interrupt sources to be enabled or disabled. This parameter can be any combination of the following values:
  • RCC_IT_LSIRDY: LSI ready interrupt
  • RCC_IT_LSERDY: LSE ready interrupt
  • RCC_IT_HSIRDY: HSI ready interrupt
  • RCC_IT_HSERDY: HSE ready interrupt
  • RCC_IT_PLLRDY: main PLL ready interrupt
  • RCC_IT_PLLI2SRDY: PLLI2S ready interrupt
NewState,:new state of the specified RCC interrupts. This parameter can be: ENABLE or DISABLE.
Return values
None