ADC_InitTypeDef Struct Reference

ADC Init structure definition. More...

#include <stm32f4xx_adc.h>

Data Fields
uint32_t	ADC_Resolution
FunctionalState	ADC_ScanConvMode
FunctionalState	ADC_ContinuousConvMode
uint32_t	ADC_ExternalTrigConvEdge
uint32_t	ADC_ExternalTrigConv
uint32_t	ADC_DataAlign
uint8_t	ADC_NbrOfConversion

Detailed Description

ADC Init structure definition.

Field Documentation

FunctionalState ADC_ContinuousConvMode

 Specifies whether the conversion 

is performed in Continuous or Single mode. This parameter can be set to ENABLE or DISABLE.

uint32_t ADC_DataAlign

                 Specifies whether the ADC data  alignment

is left or right. This parameter can be a value of ADC_data_align

uint32_t ADC_ExternalTrigConv

          Select the external event used to trigger 

the start of conversion of a regular group. This parameter can be a value of ADC_extrenal_trigger_sources_for_regular_channels_conversion

uint32_t ADC_ExternalTrigConvEdge

      Select the external trigger edge and

enable the trigger of a regular group. This parameter can be a value of ADC_external_trigger_edge_for_regular_channels_conversion

uint8_t ADC_NbrOfConversion

           Specifies the number of ADC conversions

that will be done using the sequencer for regular channel group. This parameter must range from 1 to 16.

uint32_t ADC_Resolution

                Configures the ADC resolution dual mode. 

This parameter can be a value of ADC_resolution

FunctionalState ADC_ScanConvMode

       Specifies whether the conversion 

is performed in Scan (multichannels) or Single (one channel) mode. This parameter can be set to ENABLE or DISABLE

---

The documentation for this struct was generated from the following file:

• inc/stm32f4xx_adc.h