STM32F0 Standard Peripheral bibliotheek
1.0
ST Microelectronics standard peripheral bibliotheek documentatie voor de STM32F0 familie
|
TIM_BDTR structure definition. More...
#include <stm32f0xx_tim.h>
Data Fields | |
uint16_t | TIM_OSSRState |
uint16_t | TIM_OSSIState |
uint16_t | TIM_LOCKLevel |
uint16_t | TIM_DeadTime |
uint16_t | TIM_Break |
uint16_t | TIM_BreakPolarity |
uint16_t | TIM_AutomaticOutput |
TIM_BDTR structure definition.
uint16_t TIM_AutomaticOutput |
Specifies whether the TIM Automatic Output feature is enabled or not.
This parameter can be a value of TIM_AOE_Bit_Set_Reset
uint16_t TIM_Break |
Specifies whether the TIM Break input is enabled or not.
This parameter can be a value of TIM_Break_Input_enable_disable
uint16_t TIM_BreakPolarity |
Specifies the TIM Break Input pin polarity.
This parameter can be a value of TIM_Break_Polarity
uint16_t TIM_DeadTime |
Specifies the delay time between the switching-off and the
switching-on of the outputs. This parameter can be a number between 0x00 and 0xFF
uint16_t TIM_LOCKLevel |
Specifies the LOCK level parameters.
This parameter can be a value of TIM_Lock_level
uint16_t TIM_OSSIState |
Specifies the Off-State used in Idle state.
This parameter can be a value of TIM_OSSI_Off_State_Selection_for_Idle_mode_state
uint16_t TIM_OSSRState |
Specifies the Off-State selection used in Run mode.
This parameter can be a value of TIM_OSSR_Off_State_Selection_for_Run_mode_state